ROUTE 28/ESOPUS CREEK-BRIDGE REPLACEMENT - BIN 1091290

This project will replace the State Route 28 Bridge over the Esopus Creek between Route 212 and Riseley Road with a bridge that does not have piers or abutments within the creek. Route 28 is located in a valley within the Catskill Park and runs parallel to the Esopus Creek. Due to the proximity and elevation to the creek the bridge is susceptible to flash flooding, very fast flowing and quickly rising water levels that cause scour around the bridge support piers located within the creek. After every significant rain fall the bridge is regularly closed for safety concerns that require inspection and normally result in emergency aid and follow-up emergency repair. Bridge is located in Hamlet of Mount Tremper within the Town of Shandaken, Ulster County.

Project Status

• The project has been Completed Project.
• The Bid Opening was on 01/16/2020

Project Schedule

**Schedule Variance Key:
● Red - Current Schedule Variance is > 10% of Original Completion
● Yellow - Current Schedule Variance is > 5% and <=10% of Original Completion
● Green - Current Schedule Variance is within 5% of Original Completion

Construction Costs

**Cost Variance Key:
● Red - Current Construction Costs are > 10% of Contract Award Cost
● Yellow - Current Construction Costs > 5% and <=10% of Contract Award Cost
● Green - Current Construction Costs are within 5% of Contract Award Cost

This project receives funding from the following sources:

Federal: Yes

State: Yes

Local: No

*Project Schedule Definitions:
Original Contract Completion Date - This is a contractual date,at the time the Contractor is Awarded the contract, representing when the Contractor is obligated to complete all of the work required in the contract and will no longer have a presence within the highway Right-of-Way.

Estimated Substantial Completion Date - This is the day the public (including vehicles and pedestrians) has full and unrestricted use and benefit of the facilities both from the operational and safety standpoint.